Kenwood TKR-D810 Repeater
Kenwood TKR-D810
This DMR digital repeater with 40W power is ideal for long-range communications in various scenarios.
Kenwood TKD-810 DMR 40w kenwood base radio digital uhf repeater
Kenwood TKR-D810 radio repeater is an excellent repeater, suitable for DMR kenwood base radio digital repeater, UHF repeater and two-way radio repeater, etc., widely used for its excellent performance favored by users.
Kenwood TKR-D810 radio repeater has excellent performance with 40W power. The equipment uses high-quality technology and materials to ensure its reliable operation in a wide range of radio communication situations. It is widely used in commercial occasions and public utilities, especially in large buildings and in mountainous areas, city centers, and deep tunnels, with wide signal coverage, stable performance, and long service life.
The Kenwood TKR-D810 radio repeater supports the DMR digital standard, and its design and cost optimization provide the highest quality audio performance. Moreover, the repeater supports multiple transmission modes, can adapt to different user needs, different occasions, and meet different business requirements.
Kenwood TKR-D810 radio repeater also has excellent security functions, supports digital encryption, authority management and many other functions, which can ensure the security and privacy of user communication.
Kenwood TKR-D810 radio repeater also has excellent security functions, supports digital encryption, authority management and many other functions, which can ensure the security and privacy of user communication.
The Kenwood TKR-D810 radio repeater is easy to use. Its user interface is simple and easy to understand, which helps users get started quickly. In addition, the repeater can be configured and monitored using a network connection, allowing users to fully manage it.
Features
- Programmable auxiliary input/output
- Transmit power drop detection
- Programmable button DTMF on the front panel Control (valid only in simulation mode)
- DTMF auxiliary output control (Only available in simulation mode)
- DTMF auxiliary input monitoring(Only available in simulation mode)
- Built-in transfer control
- Built-in single color code transfer control
- Dynamic QT and DQT, up to 16 QT and DQT can be pre-stored
- Hook timer
- Flash memory, support software upgrade
Specification
| GENERAL | ||
|
Frequency Range
Type 1
Type 2 |
450-520 MHz 400-470 MHz |
|
| Channel Spacing Analog Digital |
25/12.5 kHz 12.5 kHz |
|
| Current Drain standby Receive Transmit |
0.5A 1.0A 11.0A |
|
|
TX Power
50 %Duty
100 % Duty |
40 w 25 w |
|
| Frequency Stability | ±1.0 ppm | |
| Operating Voltage | 13.6VDC±15 % | |
| Operating Temperature Range | -22°Fto +140°F(-30° C to +60°c) | |
| Antenna lmpedance | 50Q | |
| Dimensions Projections not (Wx HxD) included |
19×3-1/2x 13-1/3 in (483 x 88 x 340 mm) |
|
| Weight (net) | 21.4 lbs (9.7 kg) | |
| FCC ID Type 1 Type 2 |
K44422300 | K44452500 K44452501 |
| ic Certification Type 1 Type 2 |
282F-422300 | 282F-452501 |
| RECEIVER | ||
| Sensitivity (Digital) 3% BER (12.5kHz) 1%BER |
0.28 pV -4 dB uV(0.32 pV) |
|
| Sensitivity 12 dB SINAD (Analog) |
0.28uV | |
| Adjacent Channel Selectivity (Analog)”1 (25 kHz/12.5 kHz) |
83 dB/77 dB | 80 dB /74 dB |
| FM Hum &Noise 25kHz/12.5kHz (Analog) |
55 dB /50 dB | |
| lntermodulation | 80 dB | |
| Spurious Response Rejection | 90 dB | |
| Audio Distortion (Ext.Speaker) | Less than 2.5 % at 1000 Hz | |
| Audio Output(Ext.Speaker) | 4 w(at 4 , less than 5 % distortion) | |
| TRANSMITTER | ||
| RF Power Output | 50-5w | 40-5 w |
| Modulation Limiting25 kHz1 12.5 kHz (Analog) |
±5.0 kHz/±2.5 kHz | |
| Spurious Emission | 80 dB | |
| FM Noise(ElA) 25 kHz/12.5 kHz (Analog) |
55 dB/50 dB | |
| Modulation Distortion | Less than 1 % at 10O0 Hz | |
| Modulation | 16KOF3E,11KOF3E,7K60FXD,7K6OFXE | |





