Kenwood TKR-D710 Repeater
Kenwood TKR-D710
This DMR digital repeater with 40W power is ideal for long-range communications in various scenarios.
Kenwood TKD-710 DMR 50w kenwood base radio digital vhf repeater
Kenwood TKR-D710 Digital two way radio repeater is a powerful device that supports DMR digital technology and has multiple functions such as Kenwood base radio, digital repeater, VHF repeater and two-way radio repeater , widely used in public safety, commercial radio and professional radio and other fields.
As a highly reliable digital radio repeater, Kenwood TKR-D710 supports DMR technology and has outstanding digital signal processing performance, which can realize high-speed data transmission in a wide range of applications and meet the requirements of emergency communication and voice communication. need.
In addition to supporting DMR technology, the device also has a Kenwood base radio function that can be used in fixed-installation radio stations to provide long-distance communication capabilities, enabling users to communicate with remote areas.
In addition to supporting DMR technology, the device also has a Kenwood base radio function that can be used in fixed-installation radio stations to provide long-distance communication capabilities, enabling users to communicate with remote areas.
In addition, the device also has a digital repeater function, which can realize digital signal forwarding among multiple users and provide more reliable communication services. In addition, the device also supports VHF repeaters and two-way radio repeaters, suitable for spanning a wide range of communication distances.
The Kenwood TKR-D710 Digital Two-Way Radio Repeater is also very simple to install and use. Equipped with an easy-to-use user interface and conventional operating symbols, the device does not require cumbersome settings and complicated procedures, so it can be put into use in the shortest possible time.
Features
- Programmable auxiliary input/output
- Transmit power drop detection
- Programmable button DTMF on the front panel Control (valid only in simulation mode)
- DTMF auxiliary output control (Only available in simulation mode)
- DTMF auxiliary input monitoring(Only available in simulation mode)
- Built-in transfer control
- Built-in single color code transfer control
- Dynamic QT and DQT, up to 16 QT and DQT can be pre-stored
- Hook timer
- Flash memory, support software upgrade
Specification
| GENERAL | ||
|
Frequency Range
|
VHF:136-174MHz | |
| Channel Spacing Analog Digital |
25/12.5 kHz 12.5 kHz |
|
| Current Drain standby Receive Transmit |
0.5A 1.0A 11.0A |
|
|
TX Power
50 %Duty
100 % Duty |
50 w 25 w |
|
| Frequency Stability | ±1.0 ppm | |
| Operating Voltage | 13.6VDC±15 % | |
| Operating Temperature Range | -22°Fto +140°F(-30° C to +60°c) | |
| Antenna lmpedance | 50Q | |
| Dimensions Projections not (Wx HxD) included |
19×3-1/2x 13-1/3 in (483 x 88 x 340 mm) |
|
| Weight (net) | 21.4 lbs (9.7 kg) | |
| FCC ID Type 1 Type 2 |
K44422300 | K44452500 K44452501 |
| ic Certification Type 1 Type 2 |
282F-422300 | 282F-452501 |
| RECEIVER | ||
| Sensitivity (Digital) 3% BER (12.5kHz) 1%BER |
0.28 pV -4 dB uV(0.32 pV) |
|
| Sensitivity 12 dB SINAD (Analog) |
0.28uV | |
| Adjacent Channel Selectivity (Analog)”1 (25 kHz/12.5 kHz) |
83 dB/77 dB | 80 dB /74 dB |
| FM Hum &Noise 25kHz/12.5kHz (Analog) |
55 dB /50 dB | |
| lntermodulation | 80 dB | |
| Spurious Response Rejection | 90 dB | |
| Audio Distortion (Ext.Speaker) | Less than 2.5 % at 1000 Hz | |
| Audio Output(Ext.Speaker) | 4 w(at 4 , less than 5 % distortion) | |
| TRANSMITTER | ||
| RF Power Output | 50-5w | 40-5 w |
| Modulation Limiting25 kHz1 12.5 kHz (Analog) |
±5.0 kHz/±2.5 kHz | |
| Spurious Emission | 80 dB | |
| FM Noise(ElA) 25 kHz/12.5 kHz (Analog) |
55 dB/50 dB | |
| Modulation Distortion | Less than 1 % at 10O0 Hz | |
| Modulation | 16KOF3E,11KOF3E,7K60FXD,7K6OFXE | |
